esphome:
  name: dc-sensor
  comment: DC Sensor WIP

wifi:
  ssid: ZERO
  password: Triemlistrasse0815
  ap:
    ssid: DC Sensor
    password: 0123456789

esp8266:
  board: esp12e
  framework:
    version: recommended

web_server:
  port: 80
#  auth:
#    username: "admin"
#    password: "your-web-password"

mqtt:
  broker: homeassistant.local
  discovery: True

prometheus:

api:
#  password: "your-api-password"

i2c:
  sda: GPIO14 #GPIO02 #GPIO13 #D13  # GPIO for SDA (adjust based on your wiring)
  scl: GPIO13 #GPIO14 #D14  # GPIO for SCL (adjust based on your wiring)
  scan: true  # Optional, helps verify the I2C connection

sensor:
#  - platform: aht10
#    update_interval: 15s
#    temperature:
#      name: Temperature
#      accuracy_decimals: 1
#    humidity:
#      name: Humidity
#      accuracy_decimals: 1

  - platform: sht3xd
    address: 0x44
    update_interval: 15s
    temperature:
      name: Temperature
      accuracy_decimals: 1
    humidity:
      name: Humidity
      accuracy_decimals: 1

  - platform: adc
    pin: A0
    name: "USB Voltage"
    update_interval: 1s  # Update every 1 second
    accuracy_decimals: 1  # Set number of decimal places
    #attenuation: 0dB  # Set the ADC attenuation for correct voltage readings
    filters:
      - multiply: 6  # Scale the ADC value (if needed for your specific circuit)

output:
  - platform: gpio
    pin: GPIO4
    id: led1

  - platform: gpio
    pin: GPIO5
    id: led2

light:
  - platform: binary
    name: LED 1
    output: led1

  - platform: binary
    name: LED 2
    output: led2