modified: Makefile

deleted:    main/include/dht.h
new file:   main/include/leds.h
modified:   main/include/sensor.h
deleted:    main/src/dht.c
new file:   main/src/leds.c
modified:   main/src/main.c
modified:   main/src/sensor.c

firmware/main/include/dht.h

@@ -1,77 +0,0 @@
-#pragma once
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <driver/gpio.h>
-#include <esp_err.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * Sensor type
- */
-typedef enum
-{
-    DHT_TYPE_DHT11 = 0, //!< DHT11
-    DHT_TYPE_DHT22,     //!< DHT22
-    DHT_TYPE_SI7021     //!< Itead SI7021
-} dht_sensor_type_t;
-
-
-/**
- * Initialize Config dht pin to be read on specified pin
- * If you are usingPull up resistor
- */
-
-/**
-  * @brief  Initialize Config dht pin to be read on specified pin
-  *
-  * @param  pin GPIO number of dht sensor
-  * 
-  * @return
-  *     - ESP_OK Success
-  *     - ESP_ERR_INVALID_ARG Parameter error
-  *     - ESP_FAIL Init error
-  */
-esp_err_t dht_init(gpio_num_t pin, bool pull_up);
-
-/**
-  * @brief  Read data from sensor on specified pin. dht_init must be called before reading it.
-  *         Humidity and temperature is returned as integers.
-  *         For example: humidity=625 is 62.5 %
-  *                      temperature=244 is 24.4 degrees Celsius
-  * 
-  * @param  sensor_type
-  * @param  pin GPIO number of dht sensor
-  * @param  humidity output humidity
-  * @param  temperature output temperature
-  * 
-  * @return
-  *     - ESP_OK Success
-  *     - ESP_FAIL Init error
-  */
-esp_err_t dht_read_data(dht_sensor_type_t sensor_type, gpio_num_t pin, int16_t *humidity, int16_t *temperature);
-
-
-/**
-  * @brief  Float version of dht_read_data. Read data from sensor on specified pin. dht_init must be called before reading it.
-  *         Humidity and temperature is returned as float.
-  *         For example: humidity=62.5 is 62.5 %
-  *                      temperature=24.4 is 24.4 degrees Celsius
-  * 
-  * @param  sensor_type
-  * @param  pin GPIO number of dht sensor
-  * @param  humidity output humidity
-  * @param  temperature output temperature
-  * 
-  * @return
-  *     - ESP_OK Success
-  *     - ESP_FAIL Init error
-  */
-esp_err_t dht_read_float_data(dht_sensor_type_t sensor_type, gpio_num_t pin, float *humidity, float *temperature);
-
-#ifdef __cplusplus
-}
-#endif

firmware/main/include/leds.h

@@ -0,0 +1,16 @@
+#pragma once
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED_INT GPIO_NUM_2
+#define LED1 GPIO_NUM_4
+#define LED2 GPIO_NUM_5
+
+void led_blink_task(void *pvParameter);
+unsigned initLEDs();
+
+#ifdef __cplusplus
+}
+#endif

firmware/main/include/sensor.h

@@ -6,7 +6,7 @@ extern "C" {
 #endif
 
 // Function to initialize the sensor
-void initialize(void);
+void initSensor(void);
 
 // Function to get the current humidity level
 // Returns the humidity as a percentage (0-100)