Initial commit

firmware/main/CMakeLists.txt

@@ -0,0 +1,2 @@
+idf_component_register(SRCS "main.c"
+                    INCLUDE_DIRS ".")

firmware/main/Kconfig.projbuild

@@ -0,0 +1,20 @@
+menu "Example Configuration"
+
+    config ESP_WIFI_SSID
+        string "WiFi SSID"
+        default "myssid"
+        help
+            SSID (network name) for the example to connect to.
+
+    config ESP_WIFI_PASSWORD
+        string "WiFi Password"
+        default "mypassword"
+        help
+            WiFi password (WPA or WPA2) for the example to use.
+
+    config ESP_MAXIMUM_RETRY
+        int "Maximum retry"
+        default 5
+        help
+            Set the Maximum retry to avoid station reconnecting to the AP unlimited when the AP is really inexistent.
+endmenu

firmware/main/component.mk

@@ -0,0 +1,11 @@
+#
+# Main component makefile.
+#
+# This Makefile can be left empty. By default, it will take the sources in the 
+# src/ directory, compile them and link them into lib(subdirectory_name).a 
+# in the build directory. This behaviour is entirely configurable,
+# please read the ESP-IDF documents if you need to do this.
+#
+
+COMPONENT_SRCDIRS := src
+COMPONENT_ADD_INCLUDEDIRS := include

firmware/main/include/dht.h

@@ -0,0 +1,77 @@
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <driver/gpio.h>
+#include <esp_err.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Sensor type
+ */
+typedef enum
+{
+    DHT_TYPE_DHT11 = 0, //!< DHT11
+    DHT_TYPE_DHT22,     //!< DHT22
+    DHT_TYPE_SI7021     //!< Itead SI7021
+} dht_sensor_type_t;
+
+
+/**
+ * Initialize Config dht pin to be read on specified pin
+ * If you are usingPull up resistor
+ */
+
+/**
+  * @brief  Initialize Config dht pin to be read on specified pin
+  *
+  * @param  pin GPIO number of dht sensor
+  * 
+  * @return
+  *     - ESP_OK Success
+  *     - ESP_ERR_INVALID_ARG Parameter error
+  *     - ESP_FAIL Init error
+  */
+esp_err_t dht_init(gpio_num_t pin, bool pull_up);
+
+/**
+  * @brief  Read data from sensor on specified pin. dht_init must be called before reading it.
+  *         Humidity and temperature is returned as integers.
+  *         For example: humidity=625 is 62.5 %
+  *                      temperature=244 is 24.4 degrees Celsius
+  * 
+  * @param  sensor_type
+  * @param  pin GPIO number of dht sensor
+  * @param  humidity output humidity
+  * @param  temperature output temperature
+  * 
+  * @return
+  *     - ESP_OK Success
+  *     - ESP_FAIL Init error
+  */
+esp_err_t dht_read_data(dht_sensor_type_t sensor_type, gpio_num_t pin, int16_t *humidity, int16_t *temperature);
+
+
+/**
+  * @brief  Float version of dht_read_data. Read data from sensor on specified pin. dht_init must be called before reading it.
+  *         Humidity and temperature is returned as float.
+  *         For example: humidity=62.5 is 62.5 %
+  *                      temperature=24.4 is 24.4 degrees Celsius
+  * 
+  * @param  sensor_type
+  * @param  pin GPIO number of dht sensor
+  * @param  humidity output humidity
+  * @param  temperature output temperature
+  * 
+  * @return
+  *     - ESP_OK Success
+  *     - ESP_FAIL Init error
+  */
+esp_err_t dht_read_float_data(dht_sensor_type_t sensor_type, gpio_num_t pin, float *humidity, float *temperature);
+
+#ifdef __cplusplus
+}
+#endif

firmware/main/include/http_client.h

@@ -0,0 +1,26 @@
+#ifndef HTTP_CLIENT_H
+#define HTTP_CLIENT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct hc_reg_res {
+    unsigned device_id;
+};
+
+struct hc_dev_config {
+};
+
+void hc_test(void);
+bool hc_check_updates();
+struct hc_reg_res hc_reg_dev();
+struct hc_dev_config hc_get_dev_conf();
+
+void hc_send_sensor_data(int humidity, int temperature);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

firmware/main/include/sensor.h

@@ -0,0 +1,23 @@
+#ifndef SENSOR_H
+#define SENSOR_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Function to initialize the sensor
+void initialize(void);
+
+// Function to get the current humidity level
+// Returns the humidity as a percentage (0-100)
+float getHumidity(void);
+
+// Function to get the current temperature
+// Returns the temperature in degrees Celsius
+float getTemperature(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

firmware/main/src/dht.c

@@ -0,0 +1,202 @@
+#include "dht.h"
+#include <freertos/FreeRTOS.h>
+#include <freertos/task.h>
+#include <string.h>
+#include <driver/gpio.h>
+
+#include <rom/ets_sys.h> // os_delay_us
+
+// DHT timer precision in microseconds
+#define DHT_TIMER_INTERVAL 2
+#define DHT_DATA_BITS 40
+
+// #define DEBUG_DHT
+#ifdef DEBUG_DHT
+#define debug(fmt, ...) printf("%s" fmt "\n", "dht: ", ## __VA_ARGS__);
+#else
+#define debug(fmt, ...) /* (do nothing) */
+#endif
+
+/*
+ *  Note:
+ *  A suitable pull-up resistor should be connected to the selected GPIO line
+ *
+ *  __           ______          _______                              ___________________________
+ *    \    A    /      \   C    /       \   DHT duration_data_low    /                           \
+ *     \_______/   B    \______/    D    \__________________________/   DHT duration_data_high    \__
+ *
+ *
+ *  Initializing communications with the DHT requires four 'phases' as follows:
+ *
+ *  Phase A - MCU pulls signal low for at least 18000 us
+ *  Phase B - MCU allows signal to float back up and waits 20-40us for DHT to pull it low
+ *  Phase C - DHT pulls signal low for ~80us
+ *  Phase D - DHT lets signal float back up for ~80us
+ *
+ *  After this, the DHT transmits its first bit by holding the signal low for 50us
+ *  and then letting it float back high for a period of time that depends on the data bit.
+ *  duration_data_high is shorter than 50us for a logic '0' and longer than 50us for logic '1'.
+ *
+ *  There are a total of 40 data bits transmitted sequentially. These bits are read into a byte array
+ *  of length 5.  The first and third bytes are humidity (%) and temperature (C), respectively.  Bytes 2 and 4
+ *  are zero-filled and the fifth is a checksum such that:
+ *
+ *  byte_5 == (byte_1 + byte_2 + byte_3 + btye_4) & 0xFF
+ *
+*/
+
+
+/**
+ * Wait specified time for pin to go to a specified state.
+ * If timeout is reached and pin doesn't go to a requested state
+ * false is returned.
+ * The elapsed time is returned in pointer 'duration' if it is not NULL.
+ */
+static bool dht_await_pin_state(uint8_t pin, uint32_t timeout,
+        bool expected_pin_state, uint32_t *duration)
+{
+    for (uint32_t i = 0; i < timeout; i += DHT_TIMER_INTERVAL) {
+        // need to wait at least a single interval to prevent reading a jitter
+        os_delay_us(DHT_TIMER_INTERVAL);
+        if (gpio_get_level(pin) == expected_pin_state) {
+            if (duration) {
+                *duration = i;
+            }
+            return true;
+        }
+    }
+
+    return false;
+}
+
+/**
+ * Request data from DHT and read raw bit stream.
+ * The function call should be protected from task switching.
+ * Return false if error occurred.
+ */
+static inline bool dht_fetch_data(dht_sensor_type_t sensor_type, uint8_t pin, bool bits[DHT_DATA_BITS])
+{
+    uint32_t low_duration;
+    uint32_t high_duration;
+
+    // Phase 'A' pulling signal low to initiate read sequence
+    gpio_set_level(pin, 0);
+    os_delay_us(sensor_type == DHT_TYPE_SI7021 ? 500 : 20000);
+    gpio_set_level(pin, 1);
+
+    // Step through Phase 'B', 40us
+    if (!dht_await_pin_state(pin, 40, false, NULL)) {
+        debug("Initialization error, problem in phase 'B'\n");
+        return false;
+    }
+
+    // Step through Phase 'C', 88us
+    if (!dht_await_pin_state(pin, 88, true, NULL)) {
+        debug("Initialization error, problem in phase 'C'\n");
+        return false;
+    }
+
+    // Step through Phase 'D', 88us
+    if (!dht_await_pin_state(pin, 88, false, NULL)) {
+        debug("Initialization error, problem in phase 'D'\n");
+        return false;
+    }
+
+    // Read in each of the 40 bits of data...
+    for (int i = 0; i < DHT_DATA_BITS; i++) {
+        if (!dht_await_pin_state(pin, 65, true, &low_duration)) {
+            debug("LOW bit timeout\n");
+            return false;
+        }
+        if (!dht_await_pin_state(pin, 75, false, &high_duration)) {
+            debug("HIGHT bit timeout\n");
+            return false;
+        }
+        bits[i] = high_duration > low_duration;
+    }
+    return true;
+}
+
+/**
+ * Pack two data bytes into single value and take into account sign bit.
+ */
+static inline int16_t dht_convert_data(dht_sensor_type_t sensor_type, uint8_t msb, uint8_t lsb)
+{
+    int16_t data;
+
+    if (sensor_type == DHT_TYPE_DHT22) {
+        data = msb & 0x7F;
+        data <<= 8;
+        data |= lsb;
+        if (msb & BIT(7)) {
+            data = 0 - data;       // convert it to negative
+        }
+    }
+    else {
+        data = msb * 10;
+    }
+
+    return data;
+}
+
+
+esp_err_t dht_read_data(dht_sensor_type_t sensor_type, gpio_num_t pin, int16_t *humidity, int16_t *temperature)
+{
+    bool bits[DHT_DATA_BITS];
+    uint8_t data[DHT_DATA_BITS/8] = {0};
+    bool result;
+
+    taskENTER_CRITICAL();
+    result = dht_fetch_data(sensor_type, pin, bits);
+    taskEXIT_CRITICAL();
+
+    if (!result) {
+        return ESP_FAIL;
+    }
+
+    for (uint8_t i = 0; i < DHT_DATA_BITS; i++) {
+        // Read each bit into 'result' byte array...
+        data[i/8] <<= 1;
+        data[i/8] |= bits[i];
+    }
+
+    if (data[4] != ((data[0] + data[1] + data[2] + data[3]) & 0xFF)) {
+        debug("Checksum failed, invalid data received from sensor\n");
+        return ESP_FAIL;
+    }
+
+    *humidity = dht_convert_data(sensor_type, data[0], data[1]);
+    *temperature = dht_convert_data(sensor_type, data[2], data[3]);
+
+    debug("Sensor data: humidity=%d, temp=%d\n", *humidity, *temperature);
+
+    return ESP_OK;
+}
+
+esp_err_t dht_read_float_data(dht_sensor_type_t sensor_type, gpio_num_t pin, float *humidity, float *temperature)
+{
+    int16_t i_humidity, i_temp;
+
+    if (dht_read_data(sensor_type, pin, &i_humidity, &i_temp) == ESP_OK) {
+        *humidity = (float)i_humidity / 10;
+        *temperature = (float)i_temp / 10;
+        return ESP_OK;
+    }
+    return ESP_FAIL;
+}
+
+esp_err_t dht_init(gpio_num_t pin, bool pull_up) {
+    gpio_config_t io_conf = {
+        .intr_type = GPIO_INTR_DISABLE,
+        .mode = GPIO_MODE_OUTPUT_OD,
+        .pin_bit_mask = 1ULL << pin,
+        .pull_down_en = GPIO_PULLDOWN_DISABLE,
+        .pull_up_en = pull_up ? GPIO_PULLUP_ENABLE : GPIO_PULLUP_DISABLE
+    };
+    esp_err_t result = gpio_config(&io_conf);
+    if (result == ESP_OK) {
+        gpio_set_level(pin, 1);
+        return ESP_OK;
+    }
+    return result;
+}

firmware/main/src/http_client.c

@@ -0,0 +1,106 @@
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "esp_system.h"
+#include "esp_log.h"
+#include "esp_event_loop.h"
+#include "nvs_flash.h"
+#include "esp_wifi.h"
+#include "esp_http_client.h"
+
+#include <string.h>
+
+#include "http_client.h"
+
+const char * TAG = "http_client.c";
+
+static esp_err_t _http_event_handler(esp_http_client_event_t *evt)
+{
+    switch (evt->event_id) {
+        case HTTP_EVENT_ERROR:
+            ESP_LOGI("HTTP_EVENT", "HTTP_EVENT_ERROR");
+            break;
+        case HTTP_EVENT_ON_CONNECTED:
+            ESP_LOGI("HTTP_EVENT", "HTTP_EVENT_ON_CONNECTED");
+            break;
+        case HTTP_EVENT_HEADER_SENT:
+            ESP_LOGI("HTTP_EVENT", "HTTP_EVENT_HEADER_SENT");
+            break;
+        case HTTP_EVENT_ON_HEADER:
+            ESP_LOGI("HTTP_EVENT", "HTTP_EVENT_ON_HEADER, key=%s, value=%s", evt->header_key, evt->header_value);
+            break;
+        case HTTP_EVENT_ON_DATA:
+            ESP_LOGI("HTTP_EVENT", "HTTP_EVENT_ON_DATA, len=%d", evt->data_len);
+            if (!esp_http_client_is_chunked_response(evt->client)) {
+                // Write out data
+                printf("%.*s", evt->data_len, (char*)evt->data);
+            }
+            break;
+        case HTTP_EVENT_ON_FINISH:
+            ESP_LOGI("HTTP_EVENT", "HTTP_EVENT_ON_FINISH");
+            break;
+        case HTTP_EVENT_DISCONNECTED:
+            ESP_LOGI("HTTP_EVENT", "HTTP_EVENT_DISCONNECTED");
+            break;
+    }
+    return ESP_OK;
+}
+
+static esp_http_client_config_t config = {
+    .url = "http://tempcontroller.luethi.co/report",
+    .event_handler = _http_event_handler,
+};
+
+static void http_get_task(void *pvParameters) {
+   esp_http_client_handle_t client = esp_http_client_init(&config);
+
+    while (1) {
+        // Perform the HTTP GET request
+        esp_err_t err = esp_http_client_perform(client);
+        if (err == ESP_OK) {
+            ESP_LOGI(TAG, "HTTP GET Status = %d, content_length = %d",
+                     esp_http_client_get_status_code(client),
+                     esp_http_client_get_content_length(client));
+        } else {
+            ESP_LOGE(TAG, "HTTP GET request failed: %s", esp_err_to_name(err));
+        }
+
+        // Wait for 1 second
+        vTaskDelay(pdMS_TO_TICKS(5000));
+    }
+
+    esp_http_client_cleanup(client);
+}
+
+static void send_message(const char* payload)
+{
+    esp_http_client_handle_t client = esp_http_client_init(&config);
+
+    // Set the request headers and payload
+    esp_http_client_set_method(client, HTTP_METHOD_POST);
+    esp_http_client_set_header(client, "Content-Type", "application/json");
+    esp_http_client_set_post_field(client, payload, strlen(payload));
+
+    // Perform the request
+    esp_err_t err = esp_http_client_perform(client);
+
+    if (err == ESP_OK) {
+        ESP_LOGI("HTTP_EVENT", "HTTP POST Status = %d, content_length = %d",
+                 esp_http_client_get_status_code(client),
+                 esp_http_client_get_content_length(client));
+    } else {
+        ESP_LOGE("HTTP_EVENT", "HTTP POST request failed: %s", esp_err_to_name(err));
+    }
+
+    // Cleanup
+    esp_http_client_cleanup(client);
+}
+
+void hc_test()
+{
+    xTaskCreate(&http_get_task, "http_get_task", 16384, NULL, 5, NULL);
+}
+
+void hc_send_sensor_data(int humidity, int temperature) {
+    const char* msg = "{\"humidity\": 55,\"temperature\":25.6}";
+    send_message(msg);
+}

firmware/main/src/main.c

@@ -0,0 +1,74 @@
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "esp_system.h"
+#include "esp_log.h"
+#include "esp_event_loop.h"
+#include "nvs_flash.h"
+#include "esp_wifi.h"
+#include "esp_http_client.h"
+
+#include <esp_err.h>
+#include "dht.h"
+
+#include "sensor.h"
+#include "http_client.h"
+
+#define DHT_GPIO 2 // D1 pin
+
+void wifi_init(void) {
+    tcpip_adapter_init();
+    ESP_ERROR_CHECK(esp_event_loop_create_default());
+    wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
+    ESP_ERROR_CHECK(esp_wifi_init(&cfg));
+    ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA));
+    wifi_config_t sta_config = {
+        .sta = {
+            .ssid = CONFIG_ESP_WIFI_SSID,
+            .password = CONFIG_ESP_WIFI_PASSWORD,
+        },
+    };
+    ESP_ERROR_CHECK(esp_wifi_set_config(ESP_IF_WIFI_STA, &sta_config));
+    ESP_ERROR_CHECK(esp_wifi_start());
+    ESP_ERROR_CHECK(esp_wifi_connect());
+}
+
+void temperature_task(void *arg)
+{
+    ESP_ERROR_CHECK(dht_init(DHT_GPIO, false));
+    vTaskDelay(2000 / portTICK_PERIOD_MS);
+    while (1)
+    {
+        int16_t humidity = 0;
+        int16_t temperature = 0;
+        if (dht_read_data(DHT_TYPE_DHT22, DHT_GPIO, &humidity, &temperature) == ESP_OK) {
+            // e.g. in dht22, 604 = 60.4%, 252 = 25.2 C
+            // If you want to print float data, you should run `make menuconfig`
+            // to enable full newlib and call dht_read_float_data() here instead
+            //printf("Humidity: %d Temperature: %d\n", humidity, temperature);
+            printf("Humidity: %d.%d%% Temperature: %d.%d\n", humidity/10, humidity%10, temperature/10,temperature%10);
+        } else {
+            printf("Fail to get dht temperature data\n");
+        }
+        vTaskDelay(5000 / portTICK_PERIOD_MS);
+    }
+    vTaskDelete(NULL);
+}
+
+void main_task(void* args) {
+    while (1)
+    {
+        hc_send_sensor_data(50,25);
+        vTaskDelay(5000 / portTICK_PERIOD_MS);
+    }
+}
+
+void app_main()
+{
+    ESP_ERROR_CHECK(nvs_flash_init());
+
+    xTaskCreate(main_task, "main task", 2048, NULL, tskIDLE_PRIORITY, NULL);
+
+    // WIFI
+    wifi_init();
+    //hc_test();
+}

firmware/main/src/sensor.c

@@ -0,0 +1,33 @@
+#include "sensor.h"
+#include <stdio.h>
+
+// Dummy implementations for the purpose of this example
+// Replace these with actual sensor initialization and data retrieval logic
+
+// Function to initialize the sensor
+void initialize(void) {
+    // Initialize the sensor hardware
+    // For example, set up I2C communication, configure registers, etc.
+    printf("Sensor initialized.\n");
+}
+
+// Function to get the current humidity level
+// Returns the humidity as a percentage (0-100)
+float getHumidity(void) {
+    // Read humidity data from the sensor
+    // This is a dummy value for the purpose of this example
+    float humidity = 50.0;  // Replace with actual sensor reading
+    printf("Humidity read: %.2f%%\n", humidity);
+    return humidity;
+}
+
+// Function to get the current temperature
+// Returns the temperature in degrees Celsius
+float getTemperature(void) {
+    // Read temperature data from the sensor
+    // This is a dummy value for the purpose of this example
+    float temperature = 22.0;  // Replace with actual sensor reading
+    printf("Temperature read: %.2f°C\n", temperature);
+    return temperature;
+}
+