Initial commit
This commit is contained in:
Sven Luethi committed
commit
87e828962b
51 files changed
+34212
No files matched your search
@@ -0,0 +1,6 @@
|
||||
# The following five lines of boilerplate have to be in your project's
|
||||
# CMakeLists in this exact order for cmake to work correctly
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
include($ENV{IDF_PATH}/tools/cmake/project.cmake)
|
||||
project(dc_sensor)
|
||||
@@ -0,0 +1,9 @@
|
||||
#
|
||||
# This is a project Makefile. It is assumed the directory this Makefile resides in is a
|
||||
# project subdirectory.
|
||||
#
|
||||
|
||||
PROJECT_NAME := wifi_station
|
||||
|
||||
include $(IDF_PATH)/make/project.mk
|
||||
|
||||
@@ -0,0 +1 @@
|
||||
|
||||
@@ -0,0 +1,2 @@
|
||||
idf_component_register(SRCS "main.c"
|
||||
INCLUDE_DIRS ".")
|
||||
@@ -0,0 +1,20 @@
|
||||
menu "Example Configuration"
|
||||
|
||||
config ESP_WIFI_SSID
|
||||
string "WiFi SSID"
|
||||
default "myssid"
|
||||
help
|
||||
SSID (network name) for the example to connect to.
|
||||
|
||||
config ESP_WIFI_PASSWORD
|
||||
string "WiFi Password"
|
||||
default "mypassword"
|
||||
help
|
||||
WiFi password (WPA or WPA2) for the example to use.
|
||||
|
||||
config ESP_MAXIMUM_RETRY
|
||||
int "Maximum retry"
|
||||
default 5
|
||||
help
|
||||
Set the Maximum retry to avoid station reconnecting to the AP unlimited when the AP is really inexistent.
|
||||
endmenu
|
||||
@@ -0,0 +1,11 @@
|
||||
#
|
||||
# Main component makefile.
|
||||
#
|
||||
# This Makefile can be left empty. By default, it will take the sources in the
|
||||
# src/ directory, compile them and link them into lib(subdirectory_name).a
|
||||
# in the build directory. This behaviour is entirely configurable,
|
||||
# please read the ESP-IDF documents if you need to do this.
|
||||
#
|
||||
|
||||
COMPONENT_SRCDIRS := src
|
||||
COMPONENT_ADD_INCLUDEDIRS := include
|
||||
@@ -0,0 +1,77 @@
|
||||
#pragma once
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <driver/gpio.h>
|
||||
#include <esp_err.h>
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Sensor type
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
DHT_TYPE_DHT11 = 0, //!< DHT11
|
||||
DHT_TYPE_DHT22, //!< DHT22
|
||||
DHT_TYPE_SI7021 //!< Itead SI7021
|
||||
} dht_sensor_type_t;
|
||||
|
||||
|
||||
/**
|
||||
* Initialize Config dht pin to be read on specified pin
|
||||
* If you are usingPull up resistor
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Initialize Config dht pin to be read on specified pin
|
||||
*
|
||||
* @param pin GPIO number of dht sensor
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK Success
|
||||
* - ESP_ERR_INVALID_ARG Parameter error
|
||||
* - ESP_FAIL Init error
|
||||
*/
|
||||
esp_err_t dht_init(gpio_num_t pin, bool pull_up);
|
||||
|
||||
/**
|
||||
* @brief Read data from sensor on specified pin. dht_init must be called before reading it.
|
||||
* Humidity and temperature is returned as integers.
|
||||
* For example: humidity=625 is 62.5 %
|
||||
* temperature=244 is 24.4 degrees Celsius
|
||||
*
|
||||
* @param sensor_type
|
||||
* @param pin GPIO number of dht sensor
|
||||
* @param humidity output humidity
|
||||
* @param temperature output temperature
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK Success
|
||||
* - ESP_FAIL Init error
|
||||
*/
|
||||
esp_err_t dht_read_data(dht_sensor_type_t sensor_type, gpio_num_t pin, int16_t *humidity, int16_t *temperature);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Float version of dht_read_data. Read data from sensor on specified pin. dht_init must be called before reading it.
|
||||
* Humidity and temperature is returned as float.
|
||||
* For example: humidity=62.5 is 62.5 %
|
||||
* temperature=24.4 is 24.4 degrees Celsius
|
||||
*
|
||||
* @param sensor_type
|
||||
* @param pin GPIO number of dht sensor
|
||||
* @param humidity output humidity
|
||||
* @param temperature output temperature
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK Success
|
||||
* - ESP_FAIL Init error
|
||||
*/
|
||||
esp_err_t dht_read_float_data(dht_sensor_type_t sensor_type, gpio_num_t pin, float *humidity, float *temperature);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
@@ -0,0 +1,26 @@
|
||||
#ifndef HTTP_CLIENT_H
|
||||
#define HTTP_CLIENT_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
struct hc_reg_res {
|
||||
unsigned device_id;
|
||||
};
|
||||
|
||||
struct hc_dev_config {
|
||||
};
|
||||
|
||||
void hc_test(void);
|
||||
bool hc_check_updates();
|
||||
struct hc_reg_res hc_reg_dev();
|
||||
struct hc_dev_config hc_get_dev_conf();
|
||||
|
||||
void hc_send_sensor_data(int humidity, int temperature);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,23 @@
|
||||
#ifndef SENSOR_H
|
||||
#define SENSOR_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
// Function to initialize the sensor
|
||||
void initialize(void);
|
||||
|
||||
// Function to get the current humidity level
|
||||
// Returns the humidity as a percentage (0-100)
|
||||
float getHumidity(void);
|
||||
|
||||
// Function to get the current temperature
|
||||
// Returns the temperature in degrees Celsius
|
||||
float getTemperature(void);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,202 @@
|
||||
#include "dht.h"
|
||||
#include <freertos/FreeRTOS.h>
|
||||
#include <freertos/task.h>
|
||||
#include <string.h>
|
||||
#include <driver/gpio.h>
|
||||
|
||||
#include <rom/ets_sys.h> // os_delay_us
|
||||
|
||||
// DHT timer precision in microseconds
|
||||
#define DHT_TIMER_INTERVAL 2
|
||||
#define DHT_DATA_BITS 40
|
||||
|
||||
// #define DEBUG_DHT
|
||||
#ifdef DEBUG_DHT
|
||||
#define debug(fmt, ...) printf("%s" fmt "\n", "dht: ", ## __VA_ARGS__);
|
||||
#else
|
||||
#define debug(fmt, ...) /* (do nothing) */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Note:
|
||||
* A suitable pull-up resistor should be connected to the selected GPIO line
|
||||
*
|
||||
* __ ______ _______ ___________________________
|
||||
* \ A / \ C / \ DHT duration_data_low / \
|
||||
* \_______/ B \______/ D \__________________________/ DHT duration_data_high \__
|
||||
*
|
||||
*
|
||||
* Initializing communications with the DHT requires four 'phases' as follows:
|
||||
*
|
||||
* Phase A - MCU pulls signal low for at least 18000 us
|
||||
* Phase B - MCU allows signal to float back up and waits 20-40us for DHT to pull it low
|
||||
* Phase C - DHT pulls signal low for ~80us
|
||||
* Phase D - DHT lets signal float back up for ~80us
|
||||
*
|
||||
* After this, the DHT transmits its first bit by holding the signal low for 50us
|
||||
* and then letting it float back high for a period of time that depends on the data bit.
|
||||
* duration_data_high is shorter than 50us for a logic '0' and longer than 50us for logic '1'.
|
||||
*
|
||||
* There are a total of 40 data bits transmitted sequentially. These bits are read into a byte array
|
||||
* of length 5. The first and third bytes are humidity (%) and temperature (C), respectively. Bytes 2 and 4
|
||||
* are zero-filled and the fifth is a checksum such that:
|
||||
*
|
||||
* byte_5 == (byte_1 + byte_2 + byte_3 + btye_4) & 0xFF
|
||||
*
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* Wait specified time for pin to go to a specified state.
|
||||
* If timeout is reached and pin doesn't go to a requested state
|
||||
* false is returned.
|
||||
* The elapsed time is returned in pointer 'duration' if it is not NULL.
|
||||
*/
|
||||
static bool dht_await_pin_state(uint8_t pin, uint32_t timeout,
|
||||
bool expected_pin_state, uint32_t *duration)
|
||||
{
|
||||
for (uint32_t i = 0; i < timeout; i += DHT_TIMER_INTERVAL) {
|
||||
// need to wait at least a single interval to prevent reading a jitter
|
||||
os_delay_us(DHT_TIMER_INTERVAL);
|
||||
if (gpio_get_level(pin) == expected_pin_state) {
|
||||
if (duration) {
|
||||
*duration = i;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
}
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
/**
|
||||
* Request data from DHT and read raw bit stream.
|
||||
* The function call should be protected from task switching.
|
||||
* Return false if error occurred.
|
||||
*/
|
||||
static inline bool dht_fetch_data(dht_sensor_type_t sensor_type, uint8_t pin, bool bits[DHT_DATA_BITS])
|
||||
{
|
||||
uint32_t low_duration;
|
||||
uint32_t high_duration;
|
||||
|
||||
// Phase 'A' pulling signal low to initiate read sequence
|
||||
gpio_set_level(pin, 0);
|
||||
os_delay_us(sensor_type == DHT_TYPE_SI7021 ? 500 : 20000);
|
||||
gpio_set_level(pin, 1);
|
||||
|
||||
// Step through Phase 'B', 40us
|
||||
if (!dht_await_pin_state(pin, 40, false, NULL)) {
|
||||
debug("Initialization error, problem in phase 'B'\n");
|
||||
return false;
|
||||
}
|
||||
|
||||
// Step through Phase 'C', 88us
|
||||
if (!dht_await_pin_state(pin, 88, true, NULL)) {
|
||||
debug("Initialization error, problem in phase 'C'\n");
|
||||
return false;
|
||||
}
|
||||
|
||||
// Step through Phase 'D', 88us
|
||||
if (!dht_await_pin_state(pin, 88, false, NULL)) {
|
||||
debug("Initialization error, problem in phase 'D'\n");
|
||||
return false;
|
||||
}
|
||||
|
||||
// Read in each of the 40 bits of data...
|
||||
for (int i = 0; i < DHT_DATA_BITS; i++) {
|
||||
if (!dht_await_pin_state(pin, 65, true, &low_duration)) {
|
||||
debug("LOW bit timeout\n");
|
||||
return false;
|
||||
}
|
||||
if (!dht_await_pin_state(pin, 75, false, &high_duration)) {
|
||||
debug("HIGHT bit timeout\n");
|
||||
return false;
|
||||
}
|
||||
bits[i] = high_duration > low_duration;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
/**
|
||||
* Pack two data bytes into single value and take into account sign bit.
|
||||
*/
|
||||
static inline int16_t dht_convert_data(dht_sensor_type_t sensor_type, uint8_t msb, uint8_t lsb)
|
||||
{
|
||||
int16_t data;
|
||||
|
||||
if (sensor_type == DHT_TYPE_DHT22) {
|
||||
data = msb & 0x7F;
|
||||
data <<= 8;
|
||||
data |= lsb;
|
||||
if (msb & BIT(7)) {
|
||||
data = 0 - data; // convert it to negative
|
||||
}
|
||||
}
|
||||
else {
|
||||
data = msb * 10;
|
||||
}
|
||||
|
||||
return data;
|
||||
}
|
||||
|
||||
|
||||
esp_err_t dht_read_data(dht_sensor_type_t sensor_type, gpio_num_t pin, int16_t *humidity, int16_t *temperature)
|
||||
{
|
||||
bool bits[DHT_DATA_BITS];
|
||||
uint8_t data[DHT_DATA_BITS/8] = {0};
|
||||
bool result;
|
||||
|
||||
taskENTER_CRITICAL();
|
||||
result = dht_fetch_data(sensor_type, pin, bits);
|
||||
taskEXIT_CRITICAL();
|
||||
|
||||
if (!result) {
|
||||
return ESP_FAIL;
|
||||
}
|
||||
|
||||
for (uint8_t i = 0; i < DHT_DATA_BITS; i++) {
|
||||
// Read each bit into 'result' byte array...
|
||||
data[i/8] <<= 1;
|
||||
data[i/8] |= bits[i];
|
||||
}
|
||||
|
||||
if (data[4] != ((data[0] + data[1] + data[2] + data[3]) & 0xFF)) {
|
||||
debug("Checksum failed, invalid data received from sensor\n");
|
||||
return ESP_FAIL;
|
||||
}
|
||||
|
||||
*humidity = dht_convert_data(sensor_type, data[0], data[1]);
|
||||
*temperature = dht_convert_data(sensor_type, data[2], data[3]);
|
||||
|
||||
debug("Sensor data: humidity=%d, temp=%d\n", *humidity, *temperature);
|
||||
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
esp_err_t dht_read_float_data(dht_sensor_type_t sensor_type, gpio_num_t pin, float *humidity, float *temperature)
|
||||
{
|
||||
int16_t i_humidity, i_temp;
|
||||
|
||||
if (dht_read_data(sensor_type, pin, &i_humidity, &i_temp) == ESP_OK) {
|
||||
*humidity = (float)i_humidity / 10;
|
||||
*temperature = (float)i_temp / 10;
|
||||
return ESP_OK;
|
||||
}
|
||||
return ESP_FAIL;
|
||||
}
|
||||
|
||||
esp_err_t dht_init(gpio_num_t pin, bool pull_up) {
|
||||
gpio_config_t io_conf = {
|
||||
.intr_type = GPIO_INTR_DISABLE,
|
||||
.mode = GPIO_MODE_OUTPUT_OD,
|
||||
.pin_bit_mask = 1ULL << pin,
|
||||
.pull_down_en = GPIO_PULLDOWN_DISABLE,
|
||||
.pull_up_en = pull_up ? GPIO_PULLUP_ENABLE : GPIO_PULLUP_DISABLE
|
||||
};
|
||||
esp_err_t result = gpio_config(&io_conf);
|
||||
if (result == ESP_OK) {
|
||||
gpio_set_level(pin, 1);
|
||||
return ESP_OK;
|
||||
}
|
||||
return result;
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
#include "freertos/FreeRTOS.h"
|
||||
#include "freertos/task.h"
|
||||
#include "esp_system.h"
|
||||
#include "esp_log.h"
|
||||
#include "esp_event_loop.h"
|
||||
#include "nvs_flash.h"
|
||||
#include "esp_wifi.h"
|
||||
#include "esp_http_client.h"
|
||||
|
||||
#include <string.h>
|
||||
|
||||
#include "http_client.h"
|
||||
|
||||
const char * TAG = "http_client.c";
|
||||
|
||||
static esp_err_t _http_event_handler(esp_http_client_event_t *evt)
|
||||
{
|
||||
switch (evt->event_id) {
|
||||
case HTTP_EVENT_ERROR:
|
||||
ESP_LOGI("HTTP_EVENT", "HTTP_EVENT_ERROR");
|
||||
break;
|
||||
case HTTP_EVENT_ON_CONNECTED:
|
||||
ESP_LOGI("HTTP_EVENT", "HTTP_EVENT_ON_CONNECTED");
|
||||
break;
|
||||
case HTTP_EVENT_HEADER_SENT:
|
||||
ESP_LOGI("HTTP_EVENT", "HTTP_EVENT_HEADER_SENT");
|
||||
break;
|
||||
case HTTP_EVENT_ON_HEADER:
|
||||
ESP_LOGI("HTTP_EVENT", "HTTP_EVENT_ON_HEADER, key=%s, value=%s", evt->header_key, evt->header_value);
|
||||
break;
|
||||
case HTTP_EVENT_ON_DATA:
|
||||
ESP_LOGI("HTTP_EVENT", "HTTP_EVENT_ON_DATA, len=%d", evt->data_len);
|
||||
if (!esp_http_client_is_chunked_response(evt->client)) {
|
||||
// Write out data
|
||||
printf("%.*s", evt->data_len, (char*)evt->data);
|
||||
}
|
||||
break;
|
||||
case HTTP_EVENT_ON_FINISH:
|
||||
ESP_LOGI("HTTP_EVENT", "HTTP_EVENT_ON_FINISH");
|
||||
break;
|
||||
case HTTP_EVENT_DISCONNECTED:
|
||||
ESP_LOGI("HTTP_EVENT", "HTTP_EVENT_DISCONNECTED");
|
||||
break;
|
||||
}
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
static esp_http_client_config_t config = {
|
||||
.url = "http://tempcontroller.luethi.co/report",
|
||||
.event_handler = _http_event_handler,
|
||||
};
|
||||
|
||||
static void http_get_task(void *pvParameters) {
|
||||
esp_http_client_handle_t client = esp_http_client_init(&config);
|
||||
|
||||
while (1) {
|
||||
// Perform the HTTP GET request
|
||||
esp_err_t err = esp_http_client_perform(client);
|
||||
if (err == ESP_OK) {
|
||||
ESP_LOGI(TAG, "HTTP GET Status = %d, content_length = %d",
|
||||
esp_http_client_get_status_code(client),
|
||||
esp_http_client_get_content_length(client));
|
||||
} else {
|
||||
ESP_LOGE(TAG, "HTTP GET request failed: %s", esp_err_to_name(err));
|
||||
}
|
||||
|
||||
// Wait for 1 second
|
||||
vTaskDelay(pdMS_TO_TICKS(5000));
|
||||
}
|
||||
|
||||
esp_http_client_cleanup(client);
|
||||
}
|
||||
|
||||
static void send_message(const char* payload)
|
||||
{
|
||||
esp_http_client_handle_t client = esp_http_client_init(&config);
|
||||
|
||||
// Set the request headers and payload
|
||||
esp_http_client_set_method(client, HTTP_METHOD_POST);
|
||||
esp_http_client_set_header(client, "Content-Type", "application/json");
|
||||
esp_http_client_set_post_field(client, payload, strlen(payload));
|
||||
|
||||
// Perform the request
|
||||
esp_err_t err = esp_http_client_perform(client);
|
||||
|
||||
if (err == ESP_OK) {
|
||||
ESP_LOGI("HTTP_EVENT", "HTTP POST Status = %d, content_length = %d",
|
||||
esp_http_client_get_status_code(client),
|
||||
esp_http_client_get_content_length(client));
|
||||
} else {
|
||||
ESP_LOGE("HTTP_EVENT", "HTTP POST request failed: %s", esp_err_to_name(err));
|
||||
}
|
||||
|
||||
// Cleanup
|
||||
esp_http_client_cleanup(client);
|
||||
}
|
||||
|
||||
void hc_test()
|
||||
{
|
||||
xTaskCreate(&http_get_task, "http_get_task", 16384, NULL, 5, NULL);
|
||||
}
|
||||
|
||||
void hc_send_sensor_data(int humidity, int temperature) {
|
||||
const char* msg = "{\"humidity\": 55,\"temperature\":25.6}";
|
||||
send_message(msg);
|
||||
}
|
||||
@@ -0,0 +1,74 @@
|
||||
#include "freertos/FreeRTOS.h"
|
||||
#include "freertos/task.h"
|
||||
#include "esp_system.h"
|
||||
#include "esp_log.h"
|
||||
#include "esp_event_loop.h"
|
||||
#include "nvs_flash.h"
|
||||
#include "esp_wifi.h"
|
||||
#include "esp_http_client.h"
|
||||
|
||||
#include <esp_err.h>
|
||||
#include "dht.h"
|
||||
|
||||
#include "sensor.h"
|
||||
#include "http_client.h"
|
||||
|
||||
#define DHT_GPIO 2 // D1 pin
|
||||
|
||||
void wifi_init(void) {
|
||||
tcpip_adapter_init();
|
||||
ESP_ERROR_CHECK(esp_event_loop_create_default());
|
||||
wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
|
||||
ESP_ERROR_CHECK(esp_wifi_init(&cfg));
|
||||
ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA));
|
||||
wifi_config_t sta_config = {
|
||||
.sta = {
|
||||
.ssid = CONFIG_ESP_WIFI_SSID,
|
||||
.password = CONFIG_ESP_WIFI_PASSWORD,
|
||||
},
|
||||
};
|
||||
ESP_ERROR_CHECK(esp_wifi_set_config(ESP_IF_WIFI_STA, &sta_config));
|
||||
ESP_ERROR_CHECK(esp_wifi_start());
|
||||
ESP_ERROR_CHECK(esp_wifi_connect());
|
||||
}
|
||||
|
||||
void temperature_task(void *arg)
|
||||
{
|
||||
ESP_ERROR_CHECK(dht_init(DHT_GPIO, false));
|
||||
vTaskDelay(2000 / portTICK_PERIOD_MS);
|
||||
while (1)
|
||||
{
|
||||
int16_t humidity = 0;
|
||||
int16_t temperature = 0;
|
||||
if (dht_read_data(DHT_TYPE_DHT22, DHT_GPIO, &humidity, &temperature) == ESP_OK) {
|
||||
// e.g. in dht22, 604 = 60.4%, 252 = 25.2 C
|
||||
// If you want to print float data, you should run `make menuconfig`
|
||||
// to enable full newlib and call dht_read_float_data() here instead
|
||||
//printf("Humidity: %d Temperature: %d\n", humidity, temperature);
|
||||
printf("Humidity: %d.%d%% Temperature: %d.%d\n", humidity/10, humidity%10, temperature/10,temperature%10);
|
||||
} else {
|
||||
printf("Fail to get dht temperature data\n");
|
||||
}
|
||||
vTaskDelay(5000 / portTICK_PERIOD_MS);
|
||||
}
|
||||
vTaskDelete(NULL);
|
||||
}
|
||||
|
||||
void main_task(void* args) {
|
||||
while (1)
|
||||
{
|
||||
hc_send_sensor_data(50,25);
|
||||
vTaskDelay(5000 / portTICK_PERIOD_MS);
|
||||
}
|
||||
}
|
||||
|
||||
void app_main()
|
||||
{
|
||||
ESP_ERROR_CHECK(nvs_flash_init());
|
||||
|
||||
xTaskCreate(main_task, "main task", 2048, NULL, tskIDLE_PRIORITY, NULL);
|
||||
|
||||
// WIFI
|
||||
wifi_init();
|
||||
//hc_test();
|
||||
}
|
||||
@@ -0,0 +1,33 @@
|
||||
#include "sensor.h"
|
||||
#include <stdio.h>
|
||||
|
||||
// Dummy implementations for the purpose of this example
|
||||
// Replace these with actual sensor initialization and data retrieval logic
|
||||
|
||||
// Function to initialize the sensor
|
||||
void initialize(void) {
|
||||
// Initialize the sensor hardware
|
||||
// For example, set up I2C communication, configure registers, etc.
|
||||
printf("Sensor initialized.\n");
|
||||
}
|
||||
|
||||
// Function to get the current humidity level
|
||||
// Returns the humidity as a percentage (0-100)
|
||||
float getHumidity(void) {
|
||||
// Read humidity data from the sensor
|
||||
// This is a dummy value for the purpose of this example
|
||||
float humidity = 50.0; // Replace with actual sensor reading
|
||||
printf("Humidity read: %.2f%%\n", humidity);
|
||||
return humidity;
|
||||
}
|
||||
|
||||
// Function to get the current temperature
|
||||
// Returns the temperature in degrees Celsius
|
||||
float getTemperature(void) {
|
||||
// Read temperature data from the sensor
|
||||
// This is a dummy value for the purpose of this example
|
||||
float temperature = 22.0; // Replace with actual sensor reading
|
||||
printf("Temperature read: %.2f°C\n", temperature);
|
||||
return temperature;
|
||||
}
|
||||
|
||||
@@ -0,0 +1,531 @@
|
||||
#
|
||||
# Automatically generated file. DO NOT EDIT.
|
||||
# Espressif IoT Development Framework (ESP-IDF) Project Configuration
|
||||
#
|
||||
CONFIG_IDF_TARGET_ESP8266=y
|
||||
CONFIG_IDF_TARGET="esp8266"
|
||||
|
||||
#
|
||||
# SDK tool configuration
|
||||
#
|
||||
CONFIG_SDK_TOOLPREFIX="xtensa-lx106-elf-"
|
||||
CONFIG_SDK_PYTHON="python"
|
||||
# CONFIG_SDK_MAKE_WARN_UNDEFINED_VARIABLES is not set
|
||||
CONFIG_BOOTLOADER_INIT_SPI_FLASH=y
|
||||
# CONFIG_BOOTLOADER_DISABLE_JTAG_IO is not set
|
||||
# CONFIG_BOOTLOADER_FAST_BOOT is not set
|
||||
# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set
|
||||
# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set
|
||||
# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
|
||||
CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
|
||||
# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set
|
||||
# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set
|
||||
CONFIG_LOG_BOOTLOADER_LEVEL=3
|
||||
# CONFIG_BOOTLOADER_APP_TEST is not set
|
||||
CONFIG_BOOTLOADER_STORE_OFFSET=0x0
|
||||
CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y
|
||||
CONFIG_ESPTOOLPY_PORT="/dev/ttyUSB0"
|
||||
CONFIG_ESPTOOLPY_BAUD_115200B=y
|
||||
# CONFIG_ESPTOOLPY_BAUD_230400B is not set
|
||||
# CONFIG_ESPTOOLPY_BAUD_921600B is not set
|
||||
# CONFIG_ESPTOOLPY_BAUD_2MB is not set
|
||||
# CONFIG_ESPTOOLPY_BAUD_OTHER is not set
|
||||
CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
|
||||
CONFIG_ESPTOOLPY_BAUD=115200
|
||||
CONFIG_ESPTOOLPY_COMPRESSED=y
|
||||
CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
|
||||
# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
|
||||
# CONFIG_ESPTOOLPY_FLASHMODE_DIO is not set
|
||||
# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set
|
||||
CONFIG_ESPTOOLPY_FLASHMODE="dio"
|
||||
CONFIG_SPI_FLASH_MODE=0x0
|
||||
# CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set
|
||||
CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
|
||||
# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set
|
||||
# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
|
||||
CONFIG_ESPTOOLPY_FLASHFREQ="40m"
|
||||
CONFIG_SPI_FLASH_FREQ=0x0
|
||||
# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
|
||||
# CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set
|
||||
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
|
||||
# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
|
||||
# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
|
||||
CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
|
||||
CONFIG_SPI_FLASH_SIZE=0x400000
|
||||
CONFIG_ESPTOOLPY_BEFORE_RESET=y
|
||||
# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
|
||||
CONFIG_ESPTOOLPY_BEFORE="default_reset"
|
||||
CONFIG_ESPTOOLPY_AFTER_HARD_RESET=y
|
||||
# CONFIG_ESPTOOLPY_AFTER_SOFT_RESET is not set
|
||||
# CONFIG_ESPTOOLPY_AFTER_NORESET is not set
|
||||
CONFIG_ESPTOOLPY_AFTER="hard_reset"
|
||||
# CONFIG_ESPTOOLPY_MONITOR_BAUD_9600B is not set
|
||||
# CONFIG_ESPTOOLPY_MONITOR_BAUD_57600B is not set
|
||||
# CONFIG_ESPTOOLPY_MONITOR_BAUD_74880B is not set
|
||||
CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
|
||||
# CONFIG_ESPTOOLPY_MONITOR_BAUD_230400B is not set
|
||||
# CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B is not set
|
||||
# CONFIG_ESPTOOLPY_MONITOR_BAUD_2MB is not set
|
||||
# CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER is not set
|
||||
CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL=74880
|
||||
CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
|
||||
CONFIG_ESP_WIFI_SSID="ZERO"
|
||||
CONFIG_ESP_WIFI_PASSWORD="Triemlistrasse0815"
|
||||
CONFIG_ESP_MAXIMUM_RETRY=5
|
||||
CONFIG_PARTITION_TABLE_SINGLE_APP=y
|
||||
# CONFIG_PARTITION_TABLE_TWO_OTA is not set
|
||||
# CONFIG_PARTITION_TABLE_CUSTOM is not set
|
||||
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
|
||||
CONFIG_PARTITION_TABLE_OFFSET=0x8000
|
||||
CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv"
|
||||
CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y
|
||||
# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set
|
||||
CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
|
||||
# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
|
||||
# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set
|
||||
# CONFIG_COMPILER_CXX_EXCEPTIONS is not set
|
||||
CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
|
||||
# CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set
|
||||
# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set
|
||||
# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set
|
||||
# CONFIG_COMPILER_STACK_CHECK is not set
|
||||
# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set
|
||||
CONFIG_APP_UPDATE_CHECK_APP_SUM=y
|
||||
# CONFIG_APP_UPDATE_CHECK_APP_HASH is not set
|
||||
CONFIG_APP_COMPILE_TIME_DATE=y
|
||||
# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set
|
||||
# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set
|
||||
# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set
|
||||
# CONFIG_ENABLE_COAP is not set
|
||||
CONFIG_ESP_TLS_USING_MBEDTLS=y
|
||||
# CONFIG_ESP_TLS_USING_WOLFSSL is not set
|
||||
# CONFIG_ESP_TLS_SERVER is not set
|
||||
# CONFIG_ESP_TLS_PSK_VERIFICATION is not set
|
||||
# CONFIG_ESP_TLS_INSECURE is not set
|
||||
# CONFIG_ESP_WOLFSSL_INTERNAL is not set
|
||||
# CONFIG_WOLFSSL_DEBUG is not set
|
||||
CONFIG_ESP8266_NMI_WDT=y
|
||||
# CONFIG_ESP8266_XTAL_FREQ_40 is not set
|
||||
CONFIG_ESP8266_XTAL_FREQ_26=y
|
||||
CONFIG_ESP8266_XTAL_FREQ=26
|
||||
# CONFIG_ESP8266_DEFAULT_CPU_FREQ_80 is not set
|
||||
CONFIG_ESP8266_DEFAULT_CPU_FREQ_160=y
|
||||
CONFIG_ESP8266_DEFAULT_CPU_FREQ_MHZ=160
|
||||
CONFIG_ESP_FILENAME_MACRO_NO_PATH=y
|
||||
# CONFIG_ESP_FILENAME_MACRO_RAW is not set
|
||||
# CONFIG_ESP_FILENAME_MACRO_NULL is not set
|
||||
CONFIG_USING_NEW_ETS_VPRINTF=y
|
||||
# CONFIG_LINK_ETS_PRINTF_TO_IRAM is not set
|
||||
CONFIG_ETS_PRINTF_EXIT_WHEN_FLASH_RW=y
|
||||
# CONFIG_SOC_FULL_ICACHE is not set
|
||||
CONFIG_SOC_IRAM_SIZE=0xC000
|
||||
# CONFIG_DISABLE_ROM_UART_PRINT is not set
|
||||
# CONFIG_ESP_PANIC_PRINT_HALT is not set
|
||||
CONFIG_ESP_PANIC_PRINT_REBOOT=y
|
||||
# CONFIG_ESP_PANIC_SILENT_REBOOT is not set
|
||||
# CONFIG_ESP_PANIC_GDBSTUB is not set
|
||||
CONFIG_RESET_REASON=y
|
||||
CONFIG_WIFI_PPT_TASKSTACK_SIZE=5120
|
||||
CONFIG_ESP8266_CORE_GLOBAL_DATA_LINK_IRAM=y
|
||||
# CONFIG_ESP8266_OTA_FROM_OLD is not set
|
||||
# CONFIG_ESP8266_BOOT_COPY_APP is not set
|
||||
CONFIG_ESP8266_TIME_SYSCALL_USE_FRC1=y
|
||||
# CONFIG_ESP8266_TIME_SYSCALL_USE_NONE is not set
|
||||
CONFIG_PM_ENABLE=y
|
||||
CONFIG_SCAN_AP_MAX=99
|
||||
CONFIG_WIFI_TX_RATE_SEQUENCE_FROM_HIGH=y
|
||||
# CONFIG_ESP8266_WIFI_QOS_ENABLED is not set
|
||||
# CONFIG_ESP8266_WIFI_AMPDU_RX_ENABLED is not set
|
||||
# CONFIG_ESP8266_WIFI_AMSDU_ENABLED is not set
|
||||
CONFIG_ESP8266_WIFI_RX_BUFFER_NUM=16
|
||||
CONFIG_ESP8266_WIFI_LEFT_CONTINUOUS_RX_BUFFER_NUM=16
|
||||
CONFIG_ESP8266_WIFI_RX_PKT_NUM=7
|
||||
CONFIG_ESP8266_WIFI_TX_PKT_NUM=6
|
||||
CONFIG_ESP8266_WIFI_NVS_ENABLED=y
|
||||
CONFIG_ESP8266_WIFI_CONNECT_OPEN_ROUTER_WHEN_PWD_IS_SET=y
|
||||
CONFIG_ESP8266_WIFI_ENABLE_WPA3_SAE=y
|
||||
# CONFIG_ESP8266_WIFI_DEBUG_LOG_ENABLE is not set
|
||||
CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y
|
||||
# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set
|
||||
CONFIG_ESP_PHY_INIT_DATA_VDD33_CONST=33
|
||||
CONFIG_ESP8266_PHY_MAX_WIFI_TX_POWER=20
|
||||
# CONFIG_ESP8266_HSPI_HIGH_THROUGHPUT is not set
|
||||
CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
|
||||
CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
|
||||
CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2048
|
||||
CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
|
||||
CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584
|
||||
CONFIG_ESP_CONSOLE_UART_DEFAULT=y
|
||||
# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
|
||||
# CONFIG_ESP_CONSOLE_UART_NONE is not set
|
||||
CONFIG_ESP_CONSOLE_UART_NUM=0
|
||||
CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
|
||||
# CONFIG_ESP_UART0_SWAP_IO is not set
|
||||
CONFIG_ESP_TASK_WDT=y
|
||||
CONFIG_ESP_TASK_WDT_PANIC=y
|
||||
# CONFIG_ESP_TASK_WDT_TIMEOUT_13N is not set
|
||||
# CONFIG_ESP_TASK_WDT_TIMEOUT_14N is not set
|
||||
CONFIG_ESP_TASK_WDT_TIMEOUT_15N=y
|
||||
CONFIG_ESP_TASK_WDT_TIMEOUT_S=15
|
||||
# CONFIG_ESP_EVENT_LOOP_PROFILING is not set
|
||||
CONFIG_ESP_EVENT_POST_FROM_ISR=y
|
||||
# CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS is not set
|
||||
# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set
|
||||
CONFIG_HTTP_BUF_SIZE=512
|
||||
CONFIG_HTTPD_MAX_REQ_HDR_LEN=512
|
||||
CONFIG_HTTPD_MAX_URI_LEN=512
|
||||
CONFIG_OTA_BUF_SIZE=256
|
||||
# CONFIG_OTA_ALLOW_HTTP is not set
|
||||
# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set
|
||||
CONFIG_FATFS_CODEPAGE_437=y
|
||||
# CONFIG_FATFS_CODEPAGE_720 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_737 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_771 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_775 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_850 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_852 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_855 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_857 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_860 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_861 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_862 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_863 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_864 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_865 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_866 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_869 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_932 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_936 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_949 is not set
|
||||
# CONFIG_FATFS_CODEPAGE_950 is not set
|
||||
CONFIG_FATFS_CODEPAGE=437
|
||||
CONFIG_FATFS_LFN_NONE=y
|
||||
# CONFIG_FATFS_LFN_HEAP is not set
|
||||
# CONFIG_FATFS_LFN_STACK is not set
|
||||
CONFIG_FATFS_FS_LOCK=0
|
||||
CONFIG_FATFS_TIMEOUT_MS=10000
|
||||
CONFIG_FATFS_PER_FILE_CACHE=y
|
||||
CONFIG_FMB_COMM_MODE_TCP_EN=y
|
||||
CONFIG_FMB_TCP_PORT_DEFAULT=502
|
||||
CONFIG_FMB_TCP_PORT_MAX_CONN=5
|
||||
CONFIG_FMB_TCP_CONNECTION_TOUT_SEC=20
|
||||
CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND=150
|
||||
CONFIG_FMB_MASTER_DELAY_MS_CONVERT=200
|
||||
CONFIG_FMB_QUEUE_LENGTH=20
|
||||
CONFIG_FMB_PORT_TASK_STACK_SIZE=4096
|
||||
CONFIG_FMB_SERIAL_BUF_SIZE=256
|
||||
CONFIG_FMB_PORT_TASK_PRIO=10
|
||||
CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT=y
|
||||
CONFIG_FMB_CONTROLLER_SLAVE_ID=0x00112233
|
||||
CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20
|
||||
CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
|
||||
CONFIG_FMB_CONTROLLER_STACK_SIZE=4096
|
||||
CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20
|
||||
CONFIG_FMB_TIMER_GROUP=0
|
||||
CONFIG_FMB_TIMER_INDEX=0
|
||||
# CONFIG_FMB_TIMER_ISR_IN_IRAM is not set
|
||||
# CONFIG_DISABLE_FREERTOS is not set
|
||||
CONFIG_FREERTOS_UNICORE=y
|
||||
# CONFIG_FREERTOS_ENABLE_REENT is not set
|
||||
CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
|
||||
CONFIG_FREERTOS_HZ=100
|
||||
CONFIG_FREERTOS_MAX_HOOK=2
|
||||
CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1024
|
||||
CONFIG_FREERTOS_ISR_STACKSIZE=512
|
||||
# CONFIG_FREERTOS_EXTENED_HOOKS is not set
|
||||
CONFIG_FREERTOS_GLOBAL_DATA_LINK_IRAM=y
|
||||
# CONFIG_FREERTOS_CODE_LINK_TO_IRAM is not set
|
||||
CONFIG_FREERTOS_TIMER_STACKSIZE=2048
|
||||
CONFIG_TASK_SWITCH_FASTER=y
|
||||
# CONFIG_USE_QUEUE_SETS is not set
|
||||
# CONFIG_ENABLE_FREERTOS_SLEEP is not set
|
||||
# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set
|
||||
# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
|
||||
CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y
|
||||
# CONFIG_HEAP_DISABLE_IRAM is not set
|
||||
# CONFIG_HEAP_TRACING is not set
|
||||
CONFIG_LIBSODIUM_USE_MBEDTLS_SHA=y
|
||||
# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
|
||||
# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set
|
||||
# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set
|
||||
CONFIG_LOG_DEFAULT_LEVEL_INFO=y
|
||||
# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
|
||||
# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
|
||||
CONFIG_LOG_DEFAULT_LEVEL=3
|
||||
CONFIG_LOG_COLORS=y
|
||||
# CONFIG_LOG_SET_LEVEL is not set
|
||||
CONFIG_LWIP_LOCAL_HOSTNAME="espressif"
|
||||
CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y
|
||||
# CONFIG_LWIP_L2_TO_L3_COPY is not set
|
||||
# CONFIG_LWIP_IRAM_OPTIMIZATION is not set
|
||||
CONFIG_LWIP_TIMERS_ONDEMAND=y
|
||||
CONFIG_LWIP_MAX_SOCKETS=10
|
||||
# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set
|
||||
# CONFIG_LWIP_SO_LINGER is not set
|
||||
CONFIG_LWIP_SO_REUSE=y
|
||||
CONFIG_LWIP_SO_REUSE_RXTOALL=y
|
||||
# CONFIG_LWIP_SO_RCVBUF is not set
|
||||
# CONFIG_LWIP_NETBUF_RECVINFO is not set
|
||||
CONFIG_LWIP_IP4_FRAG=y
|
||||
CONFIG_LWIP_IP6_FRAG=y
|
||||
# CONFIG_LWIP_IP4_REASSEMBLY is not set
|
||||
# CONFIG_LWIP_IP6_REASSEMBLY is not set
|
||||
# CONFIG_LWIP_IP_FORWARD is not set
|
||||
# CONFIG_LWIP_STATS is not set
|
||||
# CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set
|
||||
CONFIG_LWIP_ESP_GRATUITOUS_ARP=y
|
||||
CONFIG_LWIP_GARP_TMR_INTERVAL=60
|
||||
CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32
|
||||
CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
|
||||
# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set
|
||||
CONFIG_LWIP_DHCPS_LEASE_UNIT=60
|
||||
CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
|
||||
# CONFIG_LWIP_AUTOIP is not set
|
||||
# CONFIG_LWIP_IPV6_AUTOCONFIG is not set
|
||||
CONFIG_LWIP_NETIF_LOOPBACK=y
|
||||
CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8
|
||||
CONFIG_LWIP_MAX_ACTIVE_TCP=16
|
||||
CONFIG_LWIP_MAX_LISTENING_TCP=16
|
||||
CONFIG_LWIP_TCP_MAXRTX=12
|
||||
CONFIG_LWIP_TCP_SYNMAXRTX=6
|
||||
CONFIG_LWIP_TCP_MSS=1440
|
||||
CONFIG_LWIP_TCP_TMR_INTERVAL=250
|
||||
CONFIG_LWIP_TCP_MSL=60000
|
||||
CONFIG_LWIP_TCP_SND_BUF_DEFAULT=2880
|
||||
CONFIG_LWIP_TCP_WND_DEFAULT=5760
|
||||
CONFIG_LWIP_TCP_RECVMBOX_SIZE=6
|
||||
CONFIG_LWIP_TCP_QUEUE_OOSEQ=y
|
||||
# CONFIG_LWIP_TCP_SACK_OUT is not set
|
||||
# CONFIG_LWIP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
|
||||
CONFIG_LWIP_TCP_OVERSIZE_MSS=y
|
||||
# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set
|
||||
# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set
|
||||
CONFIG_LWIP_TCP_RTO_TIME=3000
|
||||
CONFIG_LWIP_MAX_UDP_PCBS=16
|
||||
CONFIG_LWIP_UDP_RECVMBOX_SIZE=6
|
||||
CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=2048
|
||||
CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
|
||||
# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set
|
||||
CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
|
||||
# CONFIG_LWIP_PPP_SUPPORT is not set
|
||||
CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
|
||||
CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
|
||||
# CONFIG_LWIP_MULTICAST_PING is not set
|
||||
# CONFIG_LWIP_BROADCAST_PING is not set
|
||||
CONFIG_LWIP_MAX_RAW_PCBS=16
|
||||
# CONFIG_LWIP_IPV6 is not set
|
||||
CONFIG_LWIP_DHCP_MAX_NTP_SERVERS=1
|
||||
CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000
|
||||
CONFIG_LWIP_ESP_LWIP_ASSERT=y
|
||||
# CONFIG_LWIP_DEBUG is not set
|
||||
CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
|
||||
# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set
|
||||
# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set
|
||||
CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y
|
||||
CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
|
||||
CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
|
||||
# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set
|
||||
# CONFIG_MBEDTLS_DEBUG is not set
|
||||
CONFIG_MBEDTLS_HAVE_TIME=y
|
||||
# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
|
||||
CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
|
||||
# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
|
||||
# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
|
||||
# CONFIG_MBEDTLS_TLS_DISABLED is not set
|
||||
CONFIG_MBEDTLS_TLS_SERVER=y
|
||||
CONFIG_MBEDTLS_TLS_CLIENT=y
|
||||
CONFIG_MBEDTLS_TLS_ENABLED=y
|
||||
# CONFIG_MBEDTLS_PSK_MODES is not set
|
||||
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y
|
||||
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y
|
||||
CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y
|
||||
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y
|
||||
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y
|
||||
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y
|
||||
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y
|
||||
CONFIG_MBEDTLS_SSL_RENEGOTIATION=y
|
||||
# CONFIG_MBEDTLS_SSL_PROTO_SSL3 is not set
|
||||
CONFIG_MBEDTLS_SSL_PROTO_TLS1=y
|
||||
CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y
|
||||
CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
|
||||
# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set
|
||||
# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set
|
||||
CONFIG_MBEDTLS_SSL_ALPN=y
|
||||
CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y
|
||||
CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y
|
||||
CONFIG_MBEDTLS_AES_C=y
|
||||
# CONFIG_MBEDTLS_CAMELLIA_C is not set
|
||||
# CONFIG_MBEDTLS_DES_C is not set
|
||||
CONFIG_MBEDTLS_RC4_DISABLED=y
|
||||
# CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT is not set
|
||||
# CONFIG_MBEDTLS_RC4_ENABLED is not set
|
||||
# CONFIG_MBEDTLS_BLOWFISH_C is not set
|
||||
# CONFIG_MBEDTLS_XTEA_C is not set
|
||||
CONFIG_MBEDTLS_CCM_C=y
|
||||
CONFIG_MBEDTLS_GCM_C=y
|
||||
# CONFIG_MBEDTLS_RIPEMD160_C is not set
|
||||
CONFIG_MBEDTLS_PEM_PARSE_C=y
|
||||
CONFIG_MBEDTLS_PEM_WRITE_C=y
|
||||
CONFIG_MBEDTLS_X509_CRL_PARSE_C=y
|
||||
CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
|
||||
CONFIG_MBEDTLS_ECP_C=y
|
||||
CONFIG_MBEDTLS_ECDH_C=y
|
||||
CONFIG_MBEDTLS_ECDSA_C=y
|
||||
CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y
|
||||
CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y
|
||||
CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y
|
||||
CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y
|
||||
CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y
|
||||
CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y
|
||||
CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y
|
||||
CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y
|
||||
CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y
|
||||
CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y
|
||||
CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y
|
||||
CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y
|
||||
CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
|
||||
# CONFIG_util_assert is not set
|
||||
# CONFIG_ESP_SHA is not set
|
||||
CONFIG_ESP_AES=y
|
||||
CONFIG_ESP_MD5=y
|
||||
CONFIG_ESP_ARC4=y
|
||||
# CONFIG_ENABLE_MDNS is not set
|
||||
CONFIG_MQTT_PROTOCOL_311=y
|
||||
CONFIG_MQTT_TRANSPORT_SSL=y
|
||||
CONFIG_MQTT_TRANSPORT_WEBSOCKET=y
|
||||
CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y
|
||||
# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set
|
||||
# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set
|
||||
# CONFIG_MQTT_CUSTOM_OUTBOX is not set
|
||||
CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
|
||||
# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set
|
||||
# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set
|
||||
CONFIG_NEWLIB_NANO_FORMAT=y
|
||||
# CONFIG_OPENSSL_DEBUG is not set
|
||||
CONFIG_OPENSSL_ASSERT_DO_NOTHING=y
|
||||
# CONFIG_OPENSSL_ASSERT_EXIT is not set
|
||||
CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5
|
||||
CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
|
||||
CONFIG_PTHREAD_STACK_MIN=768
|
||||
CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread"
|
||||
# CONFIG_ENABLE_TH25Q16HB_PATCH_0 is not set
|
||||
CONFIG_SPIFFS_MAX_PARTITIONS=3
|
||||
CONFIG_SPIFFS_CACHE=y
|
||||
CONFIG_SPIFFS_CACHE_WR=y
|
||||
# CONFIG_SPIFFS_CACHE_STATS is not set
|
||||
CONFIG_SPIFFS_PAGE_CHECK=y
|
||||
CONFIG_SPIFFS_GC_MAX_RUNS=10
|
||||
# CONFIG_SPIFFS_GC_STATS is not set
|
||||
CONFIG_SPIFFS_PAGE_SIZE=256
|
||||
CONFIG_SPIFFS_OBJ_NAME_LEN=32
|
||||
CONFIG_SPIFFS_USE_MAGIC=y
|
||||
CONFIG_SPIFFS_USE_MAGIC_LENGTH=y
|
||||
CONFIG_SPIFFS_META_LENGTH=4
|
||||
CONFIG_SPIFFS_USE_MTIME=y
|
||||
# CONFIG_SPIFFS_DBG is not set
|
||||
# CONFIG_SPIFFS_API_DBG is not set
|
||||
# CONFIG_SPIFFS_GC_DBG is not set
|
||||
# CONFIG_SPIFFS_CACHE_DBG is not set
|
||||
# CONFIG_SPIFFS_CHECK_DBG is not set
|
||||
# CONFIG_SPIFFS_TEST_VISUALISATION is not set
|
||||
CONFIG_IP_LOST_TIMER_INTERVAL=120
|
||||
CONFIG_TCPIP_ADAPTER_GLOBAL_DATA_LINK_IRAM=y
|
||||
CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y
|
||||
CONFIG_VFS_SUPPORT_TERMIOS=y
|
||||
CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
|
||||
CONFIG_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
|
||||
# CONFIG_WL_SECTOR_SIZE_512 is not set
|
||||
CONFIG_WL_SECTOR_SIZE_4096=y
|
||||
CONFIG_WL_SECTOR_SIZE=4096
|
||||
# CONFIG_ENABLE_UNIFIED_PROVISIONING is not set
|
||||
CONFIG_LTM_FAST=y
|
||||
CONFIG_WPA_MBEDTLS_CRYPTO=y
|
||||
# CONFIG_WPA_DEBUG_PRINT is not set
|
||||
# CONFIG_WPA_TESTING_OPTIONS is not set
|
||||
# CONFIG_WPA_WPS_WARS is not set
|
||||
# CONFIG_WPA_11KV_SUPPORT is not set
|
||||
|
||||
# Deprecated options for backward compatibility
|
||||
CONFIG_TARGET_PLATFORM="esp8266"
|
||||
CONFIG_TOOLPREFIX="xtensa-lx106-elf-"
|
||||
# CONFIG_MAKE_WARN_UNDEFINED_VARIABLES is not set
|
||||
CONFIG_FLASHMODE_QIO=y
|
||||
# CONFIG_FLASHMODE_QOUT is not set
|
||||
# CONFIG_FLASHMODE_DIO is not set
|
||||
# CONFIG_FLASHMODE_DOUT is not set
|
||||
# CONFIG_MONITOR_BAUD_9600B is not set
|
||||
# CONFIG_MONITOR_BAUD_57600B is not set
|
||||
# CONFIG_MONITOR_BAUD_74880B is not set
|
||||
CONFIG_MONITOR_BAUD_115200B=y
|
||||
# CONFIG_MONITOR_BAUD_230400B is not set
|
||||
# CONFIG_MONITOR_BAUD_921600B is not set
|
||||
# CONFIG_MONITOR_BAUD_2MB is not set
|
||||
# CONFIG_MONITOR_BAUD_OTHER is not set
|
||||
CONFIG_MONITOR_BAUD_OTHER_VAL=74880
|
||||
CONFIG_MONITOR_BAUD=115200
|
||||
CONFIG_OPTIMIZATION_LEVEL_DEBUG=y
|
||||
# CONFIG_OPTIMIZATION_LEVEL_RELEASE is not set
|
||||
CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
|
||||
# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set
|
||||
# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set
|
||||
# CONFIG_CXX_EXCEPTIONS is not set
|
||||
CONFIG_STACK_CHECK_NONE=y
|
||||
# CONFIG_STACK_CHECK_NORM is not set
|
||||
# CONFIG_STACK_CHECK_STRONG is not set
|
||||
# CONFIG_STACK_CHECK_ALL is not set
|
||||
# CONFIG_STACK_CHECK is not set
|
||||
# CONFIG_WARN_WRITE_STRINGS is not set
|
||||
CONFIG_MAIN_TASK_STACK_SIZE=3584
|
||||
CONFIG_CONSOLE_UART_DEFAULT=y
|
||||
# CONFIG_CONSOLE_UART_CUSTOM is not set
|
||||
# CONFIG_CONSOLE_UART_NONE is not set
|
||||
CONFIG_CONSOLE_UART_NUM=0
|
||||
CONFIG_CONSOLE_UART_BAUDRATE=115200
|
||||
# CONFIG_UART0_SWAP_IO is not set
|
||||
CONFIG_TASK_WDT=y
|
||||
CONFIG_TASK_WDT_PANIC=y
|
||||
CONFIG_TASK_WDT_TIMEOUT_S=15
|
||||
CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150
|
||||
CONFIG_MB_MASTER_DELAY_MS_CONVERT=200
|
||||
CONFIG_MB_QUEUE_LENGTH=20
|
||||
CONFIG_MB_SERIAL_TASK_STACK_SIZE=4096
|
||||
CONFIG_MB_SERIAL_BUF_SIZE=256
|
||||
CONFIG_MB_SERIAL_TASK_PRIO=10
|
||||
CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT=y
|
||||
CONFIG_MB_CONTROLLER_SLAVE_ID=0x00112233
|
||||
CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20
|
||||
CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
|
||||
CONFIG_MB_CONTROLLER_STACK_SIZE=4096
|
||||
CONFIG_MB_EVENT_QUEUE_TIMEOUT=20
|
||||
CONFIG_MB_TIMER_GROUP=0
|
||||
CONFIG_MB_TIMER_INDEX=0
|
||||
# CONFIG_L2_TO_L3_COPY is not set
|
||||
# CONFIG_USE_ONLY_LWIP_SELECT is not set
|
||||
CONFIG_ESP_GRATUITOUS_ARP=y
|
||||
CONFIG_GARP_TMR_INTERVAL=60
|
||||
CONFIG_TCPIP_RECVMBOX_SIZE=32
|
||||
CONFIG_TCP_MAXRTX=12
|
||||
CONFIG_TCP_SYNMAXRTX=6
|
||||
CONFIG_TCP_MSS=1440
|
||||
CONFIG_TCP_MSL=60000
|
||||
CONFIG_TCP_SND_BUF_DEFAULT=2880
|
||||
CONFIG_TCP_WND_DEFAULT=5760
|
||||
CONFIG_TCP_RECVMBOX_SIZE=6
|
||||
CONFIG_TCP_QUEUE_OOSEQ=y
|
||||
# CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
|
||||
CONFIG_TCP_OVERSIZE_MSS=y
|
||||
# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set
|
||||
# CONFIG_TCP_OVERSIZE_DISABLE is not set
|
||||
CONFIG_UDP_RECVMBOX_SIZE=6
|
||||
CONFIG_TCPIP_TASK_STACK_SIZE=2048
|
||||
CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
|
||||
# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set
|
||||
CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF
|
||||
# CONFIG_PPP_SUPPORT is not set
|
||||
CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
|
||||
CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
|
||||
CONFIG_ESP32_PTHREAD_STACK_MIN=768
|
||||
CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread"
|
||||
CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
|
||||
CONFIG_SUPPORT_TERMIOS=y
|
||||
# End of deprecated options
|
||||
Reference in new issue
Block a user